LMB Spring Finger Extension Assist
This
extremely
versatile model
extends the PIP
joint and has a
slight extension
effect on the MP
joint. Designed for
patient comfort
and a precise fit,
this splint is
hand-finished with
an emphasis
on distal pad
curvature. Tension
is adjustable by
careful bending.
Patent #4,243,026.
Indications:
Finger flexion
tightness and
boutonniere
deformity (allows IP
flexion)
Force: 15°
flexion ≈ approx. 8 oz.
At 90°
flexion ≈ approx. 4 lbs
2 1/4"
501AA
2 5/8"
501A
3"
5018
3 1/2"
501C
4"
501D
Measure finger to be
fitted from palmar crease to
distal finger
crease (finger
extended).
LMB Acu-Spring Finger Extension Assist
Increases ROM
limited by joint
tightness and
flexion contractures.
Slightly more force
than the Model
#501.
Ideal for regaining last few
degrees of PIP
extension. Can
be bent to adjust
tension. Axis of
motion is close to
the PIP joint to
maintain splint
alignment. Broad,
curved dorsal center
pad distributes
pressure over a
large area. Slightly
extends the MP
joint. Patent
#4,243,026.
Indications:
Joint tightness and
flexion
contractures.
Force: 15' flexion ≈ approx. 12 oz.
At 90' flexion ≈ approx. 6 lbs.
2 1/4"
507AA
2 5/8"
507A
3"
507B
3 3/S"
507C
3 3/4"
507D
Measure finger to be
fitted from palmar crease to
distal finger
crease (finger
extended).
LMB Spring PIP Extension Assist
Shorter than the
Model
#591,
but
with all the same
features and
benefits. The Model
#504 does not
interfere with the
MP joint while
extending the PIP
joint. Tension
is adjustable by
careful bending.
Patent #4,243,026.
Indications:
PIP joint tightness and
boutonniere
deformity.
Force: 15' flexion ≈ approx. 8 oz.
At 90' flexion ≈ approx. 4 lbs.
1 3/4"
504AA
1
7/8 "
504A
2"
5048
2 1/4"
504C
2 5/8"
504D
Measure on the volar
surface, distance from the MP crease to the
distal finger
crease.
LMB Acu-Spring PIP Extension Assist
Shorter than the
Model
#507,
and
similar to the #504,
but with all the
same Acu-Spring
features and
benefits, the Model
#508 does
not extend the MP
joint while
extending the PIP
joint. Patent
#4,243,026.
Indications:
Joint tightness and
flexion
contractures.
Force: 15'
flexion ≈ approx. 12 oz.
At 90' flexion ≈ approx. 6 lbs
1 3/4"
508AA
2"
50BA
2 1/4"
508B
2 5/8"
508C
3"
508D
Measure on the volar surface, distance from the MP crease to the
distal finger
crease.
The DEBQL symbol is
only assigned to DeRoyal's highest quality, most durable products. 100%
guaranteed, these products are
designed for longer
wear (at least six months) and even higher patient comfort (to ensure patient
compliance).
Within the U.S.A.:
800.251.9864
phone.
800.543.2182
fax. www.deroyal.com
3
|
